Our team is always here to help
The Iowa Great Lakes Sanitary District maintains over 100 miles of sewer pipes, cleaning and inspecting 30 to 40 miles annually. This involves water jet cleaning and camera inspections. Maintenance issues are ranked by NASCO PACP criteria, documented, and reviewed for repairs based on severity.
While we do our best to inspect the pipes and keep them clean, there are steps you can take to help maintain the health of the system.
Sump pumps
Setting up your sump pump to avoid illegal connections
Sump pumps, along with other improper connections, can cause significant issues in the sanitary sewer system. Sanitary sewers are designed to handle wastewater only. Water from sump pumps, downspouts, outside surface drains, and similar sources can rapidly overwhelm the public sewer system. It is worth noting that an average sump pump operating for four hours a day can discharge as much water as approximately 30 households produce daily. The connection of sump pumps to the public sewer system is a considerable problem in several areas within the Iowa Great Lakes Sanitary District. All cities and the Sanitary District strictly prohibit connecting sump pumps to the sanitary sewer system.
Identifying illegal connections
To determine if your sump pump is illegally connected:
- If it leads to another pipe within the building that does not exit the building, it may be connected to the sanitary sewer illegally
- If the pipe has valves installed, it could indicate an illegal connection to the sanitary sewer
- If a black hose runs into a pipe or floor drain, it may also signify an illegal connection to the sewer
If you are uncertain about identifying an illegal connection, arrange an inspection using the link below. The Sanitary District aims to work with property owners to rectify any issues promptly without penalties for quick compliance. Additionally, property owners should contact the installer responsible for any illegal connection to correct the issue. Local plumbers and plumbing companies are aware that connecting a sump pump to the sanitary sewer system is prohibited.
Penalties and compliance
When a sump pump is found connected to the sewer system, the penalty is $1,000 per day for each day the sump pump remains connected, either directly or indirectly to the public sewer system. Property owners should consult with their city or county regulations, as the Sanitary District requires the illegal connection to be removed entirely. Some cities permit water to be diverted to storm sewers, road ditches, drainage ponds, or similar stormwater structures, while others have specific guidelines on where the water can be directed.
It is illegal to:
- Run the sump pump hose to a floor drain
- Run a sump hose to any drain connected to the sewer
- Connect a sump pump to the house plumbing that goes to the public sewer system
- Run the hose to the cleanout in the yard
The Sanitary District possesses several tools to verify where a sump pump discharges water. Properties with illegal connections will incur a fine of $1,000 per day until the connection is removed. The property owner must ensure the connection is removed in such a way that it cannot be easily reconnected, either directly or indirectly, to the public sewer system.
Fats, oils, and greases
How to dispose of these materials
Fats, Oils, and Grease (FOG) can severely impact both private and public sewer systems. FOG typically originates from commercial or industrial operations. It leaves a property in hot water as a liquid but solidifies upon cooling, sticking to pipe walls. As it accumulates, it breaks off in larger pieces, flows downstream, and eventually causes blockages. This buildup can lead to sewer backups and potentially cause water to enter private homes.
Commercial kitchens such as those in restaurants, schools, hospitals, catering services, industrial food facilities, and automotive repair shops must have grease traps or interceptors. These devices must be correctly sized, installed so that hot water does not flow through them, and regularly cleaned and maintained according to manufacturers' recommendations. The Sanitary District is developing a FOG program that will include inspection, record-keeping, and other measures to limit grease entering the public sewer system.
Swimming pools
Avoid flooding with proper discharge practices
Swimming pools provide great summer recreation in the Iowa Great Lakes area, featuring several indoor and outdoor permanent pools. However, they can cause problems when connected to the public sewer system. The Sanitary District has faced flooding issues from pool pumps discharging into sewer mains, leading to sewer backups or spills into lakes.
Currently, only filter backwashes from permanent pools are allowed to connect to the sewer system; all other drains must discharge elsewhere or on the surface. The Sanitary District is exploring options for more pool discharges, but with varying pool designs and sewers, the evaluation will continue.